Installer Robert Todd setting up shop
Robert Todd (L) and Fred Curtis, KI6GRO attaching the mounting braces to the solar panels.
Solar panels with the braces attached.
Robert Todd installing the mounting brackets to the panels.
Robert Todd installing the mounting brackets on the panels.
Installing the mounting brackets
Robert Todd rigging the lifting sling
Fred Curtis checking the position of the panels on the tower.
The two 100 watt solar panels in their final position on the tower.
The panels on the tower
Power connections on the back of the tower.
Installer Robert Todd securing the power wiring.
The panels in their final position on the tower
The SOBARS repeater installation
Robert Todd working on the wiring inside the repeater building.
Installing the connectors on the wiring to the battery.
The charge controller (right) and the monitor panel.
The charge controller. The black wires are from the panels and the red/black wires go to the battery
The monitor panel showing the temperature in the building
Monitor panel showing the charging amperage.
Monitor panel showing battery voltage.
The repeater on pure solar DC power.
Wiring connections on the battery.
Repeater cans and battery.
The back of the repeater.